A guide to early Corgi die-cast models.
If you decide to collect the early Corgi models it is important to collect the best examples possible. Mint models are very scarce and command a good price.
When grading these models we use in the trade this table of describing the condition of such models. This applies to the condition of the box as well
M - Mint. The model must be complete and as fresh, new and original in appearance as when first received from the manufacturers.
E - Excellent The model is in almost mint condition and is only barred from that classification by having a few slight flaws, egg slight paintwork chipping in obscure areas.
G - Good The model is a complete and original condition and retains an overall acceptable appearance, despite having a few chips or rubbed paintwork.
F - Fair The model may not be in original state having, for egg, a broken part, replacement part, or may have signs of metal fatigue. The paintwork may be faded, well chipped, re painted. There may be signs or rust. Unless the model is rare it is barely collectable.
P - Poor The model may be damaged, incomplete, re painted, altered, metal fatigue, or has a rusted base plate, or heavily chipped paintwork etc.
Unless the model is rare it has very little value.
These may be used for spares or restoration.
When grading these models we use in the trade this table of describing the condition of such models. This applies to the condition of the box as well
M - Mint. The model must be complete and as fresh, new and original in appearance as when first received from the manufacturers.
E - Excellent The model is in almost mint condition and is only barred from that classification by having a few slight flaws, egg slight paintwork chipping in obscure areas.
G - Good The model is a complete and original condition and retains an overall acceptable appearance, despite having a few chips or rubbed paintwork.
F - Fair The model may not be in original state having, for egg, a broken part, replacement part, or may have signs of metal fatigue. The paintwork may be faded, well chipped, re painted. There may be signs or rust. Unless the model is rare it is barely collectable.
P - Poor The model may be damaged, incomplete, re painted, altered, metal fatigue, or has a rusted base plate, or heavily chipped paintwork etc.
Unless the model is rare it has very little value.
These may be used for spares or restoration.
From Wikipedia, the free encyclopedia
Corgi Toys (trademark) is the name of a range of die-cast toy vehicles produced by Mettoy Playcraft Ltd. in the United Kingdom.
The Mettoy (Metal Toy) company was founded in 1933 by German émigré Philip Ullmann in Northampton, England, where he was later joined by South African-born German Arthur Katz, who had previously worked for Ullmann at his toy company Tipp and Co of Nuremberg. They decided to market a range of toy vehicles as competition to Meccano's Dinky Toys model vehicles, which had dominated the British market for many years. Corgi Toys were introduced in the UK in July 1956 and were manufactured in Swansea, Wales, for 27 years before the company went into liquidation. A management buy-out re-formed the company as Corgi Toys Limited in March 1984. In 1989, the management sold the Corgi brand to Mattel and the factory was retained under the name of Microlink Industries Ltd. In 1995, Corgi regained its independence as a new company, Corgi Classics Limited, and moved to new premises in Leicester.
The range was exported worldwide and sold in large numbers. Some of the best known and most popular models were of cars made famous in film and television such as the Batmobile, Chitty Chitty Bang Bang and James Bond's Aston Martin DB5 – which remains the largest selling toy car ever produced. Although the largest single vehicle type featured in the Corgi Toys range were models of cars from manufacturers around the world, this article sub-divides vehicles into genres, wherever possible, to allow a more detailed look at the variety of models produced by the company.
Mettoy became established in Northampton and within six years of the company's founding, the Northampton factory had 600 employees.[1] A production plant was built at Fforestfach in Swansea, South Wales, to manufacture the new range of Corgi Toys. This provided many new jobs in an area of high unemployment following the scaling down of local coal mining operations.[2]
Prior to the introduction of Corgi Toys, Mettoy mainly produced tin plate toys. However, in the early 1950s, they began producing a few products in cast metal. The first was a large scale wind-up racer made with a cast aluminium body and tin plate wheels. The body material was soon changed to die cast zinc and it was refitted with cast wheels and moulded rubber tyres. Other models followed and the product line was given the name "Castoys." These were the direct ancestors of Corgi Toys.
305 Triumph TR3The name 'Corgi Toys' was chosen by Philip Ullmann in honour of the company's new home, taken from the Welsh breed of dog, the Corgi, and the iconic Corgi dog logo branded the new range. The name was short and easy to remember, further aligning the range with their rival Dinky Toys. Corgi Toys also included plastic glazing,[3] which lent the models a greater authenticity, and they carried the advertising slogan "the ones with windows".
The 1956 releases were all familiar British vehicles. Six family saloon cars; Ford Consul (200/200M), Austin A50 Cambridge (201/201M), Morris Cowley (202/202M), Vauxhall Velox (203/203M), Rover 90 (204/204M), Riley Pathfinder (205/205M) and Hillman Husky (206/206M),[3] and two sports cars; Austin-Healey 100 (300) and Triumph TR2 (301).
Initially, all models were issued in free-rolling form, or with friction drive motors, with the exception of the heavy commercials which would have been too bulky and the sports cars whose low slung bodies would not be able to accommodate the motors. The Mechanical versions, as they were known, were indicated by an 'M' suffix to the model number and were available in different colour schemes. They were issued with tougher die-cast bases to support the extra weight of the motor, and in far fewer numbers. Mechanical versions did not sell particularly well, partly due to a significantly higher purchase price, and were phased out in 1960 with Ford Thunderbird (214M) the last of the line.
Expansion and innovation[edit]
309 Aston Martin DB4 Competition ModelBritish cars dominated the releases over the next few years reflecting the company's concentration on the home market, but by 1957 new markets were being explored and the first European car to be modelled was the Citroën DS19 (210) issued in December of that year. The first American car, the Studebaker Golden Hawk (211/211M), was released in February 1958 and by the early 1960s the Corgi range was being exported widely, finding particular popularity in Europe, Australia, Canada, the United States of America and areas of southeast Asia such as Singapore, Malaysia and Hong Kong, and gradually more foreign vehicles were included to appeal to these new markets.
241 Ghia L6.4Models were issued on a monthly basis and the range grew quickly to include vehicles of all types. Gradually the models became more sophisticated with the addition of such features as 'Glidamatic' spring suspension and a detailed interior on the Renault Floride (222) in October 1959, and the fibre-optic style 'Trans-o-Lite' illuminating lights system first seen on the Superior Ambulance on Cadillac Chassis (437) in October 1962. The early type of interior which was known as 'vac-formed', was produced by stretching a thin sheet of acetate over a mould by means of a vacuum, and lasted for three years until being replaced by the crisper, more detailed injection-moulded type first seen in the Thames 'Airborne' caravan (420) in February 1962.
The Corgi design team came up with the first model with an opening feature in February 1960, the Aston Martin DB4 (218) which had an opening bonnet. Steerable front wheels, jewelled headlights and rear lights and an opening boot complete with spare wheel were added on the Bentley Continental Sports Saloon (224) in April 1961, and by October 1963 with the release of the Ghia L6.4 (241) new levels of authenticity were reached. This model featured a number of 'firsts' with not only an opening bonnet, but also opening doors and boot, and a detailed interior with a rear view mirror, folding front seats, and even a model corgi dog sitting on the rear parcel shelf. At introduction, the Ghia sold for eight shillings and sixpence, and even at this relatively high price around 1.7 million were sold before being withdrawn in 1969. By contrast, only twenty five examples of the real car were completed.[4] Another popular model was the Jaguar Mark X (#238; 1962-1967) — over 1.1 million were sold, and hardly any other model was
released in as many colours.[5]
In 1964, Mettoy introduced a range of smaller scale vehicles called Husky Toys. These retailed at a lower retail price than the larger Corgi Toys, and competed with Matchbox Toys.[citation needed]
Corgi Classics[edit]In 1964 Corgi diversified into the adult collector market and released a range of highly detailed models of vintage cars called 'Corgi Classics'. Marketed at a higher price point than Lesney's Matchbox 'Models of Yesteryear', they met with mixed success. Initial releases were a 1927 Bentley finished in green (9001) or red (9002), an open 1915 Ford Model T coloured black (9011) and a version finished in blue with the hood raised (9013), a 1910 Daimler 38 finished in red (9021) and a 1911 Renault 12/16 finished in lavender (9031) or pale yellow (9032).
Two years later, a 1912 Rolls-Royce Silver Ghost coloured silver (9041) was added to the range, which was updated in 1970 to feature American TV stars The Hardy Boys, discussed later in this article. A Ford Model T van in Lyons Tea livery (9014) appeared in the 1967 Corgi catalogue but was never released. The Corgi Classics range had been discontinued by 1969, although the name was later revived for a range of adult collectable models in the 1980s.
Corgi Major Toys[edit]Following the success of the Dinky Supertoys range of die-cast trucks, Corgi decided to launch a range of heavy commercial vehicles in October 1957 with the release of the Carrimore Car Transporter (1101) featuring a Bedford S-Type tractor unit with full glazing in keeping with the rest of the Corgi range, and the company's first gift set including the Carrimore Car Transporter and four cars (GS1); Austin Cambridge (201), Jaguar 2.4 (208), Austin-Healey (300) and MGA (302) in time for the Christmas market in December 1957.
Early models in the new 'Corgi Major' range were issued in sturdy two piece boxes featuring the blue and yellow colour scheme that had recently been adopted across the entire Corgi range, later models in the 1960s using clear fronted packaging in line with the rest of the Corgi Toys range. The Carrimore Low Loader(1100) was the next release in April 1958 which was a low loader trailer attached to the Bedford cab and was followed by the similar Machinery Carrier low loader (1104) in September 1958. In November 1958 the Euclid TC12 Bulldozer (1102) was issued. A large earth mover which was being widely used in the construction of the M1, the UK's first motorway, the Euclid factory was only two miles from Corgi headquarters which allowed easy access to all the data required to produce a very accurate model. April 1959 saw the release of the Bedford Fuel Tanker in the attractive red livery of 'Mobilgas' (1110) and this model was revamped in pale blue and white as the Bedford Milk Tanker (1129) in May 1962, and both were later re-issued with a more modern Bedford TK cab.
The Midland Red Motor Express Coach (1120), issued in March 1960, was a model of the latest high speed coach for the motorway age fitted with a turbo-charged engine and capable of 100 mph, and a model of the pioneering SR.N1 hovercraft (1119) was released in June 1960. In November 1962 the new Bedford TK cab unit was also fitted to the existing Carrimore Car Transporter (1105) and was also included in a new Car Transporter Gift Set (GS28) in December 1963 along with four cars; Ford Consul Classic (234), Mercedes-Benz 220 SE (230), Renault Floride (222) and Fiat 2100 (232). The Ecurie Ecosse Racing Transporter (1126) issued in October 1961 was a racing car transporter custom built for the Scottish motor racing team Ecurie Ecosse, with room for three cars and an on-board workshop.
The Corgi model featured operational ramps, a sliding door revealing the workshop complete with a miniature lathe, operational steering, and was finished in authentic dark blue. Racing Transporter Set (GS16) was also released in October 1961 featuring the Ecurie Ecosse transporter along with three racing cars; Vanwall (150), BRM (156) and [Lotus XI] (151).
The Simon Snorkel Aerial Rescue Truck (1127) was issued in September 1964. This model fire engine was based on a Bedford TK chassis and featured an extendable centre-hinged arm with rescue cradle complete with fire fighter figure holding a die-cast water cannon which could be manoeuvred by means of a rotating base and wheels and gears. The model stayed in the range until being updated with a more modern Dennis cab (1126) in June 1977.
1142 Holmes Wrecker Recovery VehicleA new cab unit was introduced in September 1965. The Ford H Cab and Detachable Trailer (1137) was an American truck produced by Corgi to appeal to the lucrative US market and featured a forward tilting cab revealing a highly detailed engine, realistic moveable door mirrors and die-cast metal air horns and side ladders. The large box trailer featured sliding side doors, opening rear doors and was finished in the blue and silver 'Express Services' livery. The leap in quality of this model proved that the Major range had entered a new era, and it continued to sell well until 1972. The new Ford cab was used again in April 1966 with a new version of the Carrimore Car Transporter (1138) which had been re-designed to carry up to six Corgi cars, and which also featured in Gift Set 41 along with six cars; Ford Cortina Estate (440), Rover 2000 (252), Hillman Imp (251), Mini Cooper De-Luxe (249), Austin Seven (225) and Mini Cooper Monte Carlo 1966 (321). This gift set was initially only available by mail order but was finally issued in time for Christmas in December 1967.
The Holmes Wrecker Recovery Vehicle (1142) issued in May 1967 was also based on the Ford H Series tractor unit, and featured twin boom die-cast recovery cranes with hooks attached to cotton lines that could be extended by winding a pair of spare wheels attached to the sides of the vehicle, and also included were two model mechanics previously seen with the 'Express Services' truck. The American LaFrance Aerial Rescue Truck (1143) was added to the Major range in October 1968 and was a highly detailed model of a tiller/ladder truck (or hook and ladder) from the United States of America. It featured an extendable ladder on a rotating base complete with plastic ladder extensions and model firemen and has recently been re-issued by the modern Corgi company in a number of authentic liveries.
The Carrimore Car Transporter Mark IV using the recently introduced Scammell cab was also released in April 1969 and a gift set (GS48) featuring the new transporter and six cars; MGC GT (345), Mini Cooper Monte Carlo 1967 (339), Sunbeam Imp Monte Carlo 1967 (340), Mini Cooper S Magnifique (334), Morris Mini Minor (226) and The Saint's Volvo P1800 (258) soon followed. By October 1970 the Carrimore Car Transporter Mark V (1146) had grown to three decks and Gift Set 20 again featured the transporter complete with six cars now fitted with Whizzwheels; Lancia Fulvia Zagato (372), Marcos 3 Litre (377), MGC GT (378), Ford Capri 3 Litre (311), The Saint's Volvo P1800 (201) and Pontiac Firebird (343). The colour schemes applied to some cars in the Car Transporter Gift Sets were unique to models included in these sets, such as the MGC GT (345) finished in orange, and today are particularly collectable. The Scammell Handyman Ferrymasters Truck (1147) issued in December 1969, proved to be the last new application for the Scammell cab and was finished in the authentic yellow and white livery of the Ferrymasters haulage company.
The Major range continued into the 1970s but along with the Corgi Toys range suffered somewhat from the constraints on development budgets that the company was forced to make. The Mercedes-Benz Unimog and snowplough (1150) was released in February 1971 and another American cab unit was introduced in October 1971. The new Mack was coupled with a fuel tanker in the livery of "Esso" (1152) in October 1971 and a Transcontinental trailer (1100) in November 1971, and fitted with an updated version of the Priestman Cub Shovel now converted to become a crane in October 1972 as the Mack Priestman Crane Truck (1154).
A new Berliet cab was introduced in May 1974 as the Crane Fruehauf Discharge Dumper (1102), a large articulated aggregate carrier for use on construction sites, and the new cab was also used as the Berliet Wrecker Truck (1144) in March 1975 updating the aforementioned Holmes Wrecker, which had been in the range since 1967. The Pathfinder Airport Crash Truck (1103) released in September 1974 had won the Design Council Engineering Award for its manufacturer Chubb, and the Corgi miniature included an internal water tank allowing water to be squirted through die-cast water cannons by pumping a rubber bulb. Another new cab was introduced in April 1976. The Ford Transcontinental was designed for long range treks across the European continent and was first issued coupled to the fuel tanker previously seen with the earlier Mack cab, also in 'Esso' livery (1157) or "Gulf" livery (1160), and, later in February 1982, in the livery of "Guinness" (1169).
Contact Keith on 02476 338641 or 07747020513